In Stock ✔ | Brand new and factory sealed ✔
Ships within the U.S. | Manufacturer's Warranty Included
Epos K3 Floor-Standing Loudspeaker (pair)
The K-Series marks the beginning of a new era for Epos. Designed by Luke Creek, the 2 ˝ way K3 floor-standing loudspeaker is the largest model within this range of loudspeakers.
The initial concept started out with a thought about how to take conventional cabinet loudspeakers into a new area of the market. This spawned the idea of how to make a loudspeaker the hub, or central place, for your Hi-Fi system. This concept had to be achieved whilst preserving Epos’ high-end roots.
The K-Series has a number of unique design features that enables it to achieve its design goal. These features include: stylish looks, High Velocity Slot Ports (HVSP), rear mounted drivers, detachable rear baffles and upgradability to fully powered active mode. The K-Series is much more than just another box loudspeaker, it is ‘probably’ the future!
Using virtual performance CAD simulation tools, Epos has achieved very high performance, and a clean, open yet smooth sound quality from this tweeter.
The tweeter has a low resonance frequency, high sensitivity and extended high frequency response. With a 25mm fabric-dome, short horn, high-temperature ferro-fluid cooled voice-coil, and neodymium magnet, it is capable of high output levels for extended periods without degradation to sound quality.
The Epos K3 mid-bass drivers produces an even frequency response and smooth roll-off.
The Epos 187mm mid-bass driver has a high-quality polypropylene cone and a bullet-shaped dust cap. These components form a stiff, yet pliable, well-damped structure which retains its shape even under high power loading.
The K3 mid-bass drivers also benefits from a bucking-magnet system, ensuring all the magnetic force is concentrated around the voice-coil, allowing for low distortion and high efficiency.
In true Epos tradition; the K-series has reverted to a more simplistic passive crossover topology, for which the brand is synonymous.
A first order crossover is used to allow the Epos tweeter to have a wide dynamic range with super low distortion. The mid-bass crossover uses a 2nd order filter ensuring the K3 is an easy load for any amplifier.
● Power Handling
200 Watts unclipped speech and music
● Frequency Range
41 Hz – 30 kHz ±3dB
● Impedance 4 Ohm nominal
91dB / 2.83V@1m
● Tweeter Epos 25mm soft dome with high-temperature voice coil, ferrofluid cooling and neodymium magnet system.
● Bass/Midrange Driver 2 x 187mm Epos mid bass drivers, with 25mm high- temperature voice coil and polypropylene cone.
● 18 AWG stranded oxygen free copper cable.
● The K3 has an optional Snap on-grille.
● Size HxWxD
● 935 x 212 x 300mm
● 18.5 kg per single speaker
● 20 kg per carton
● Packaged One speaker per carton.
● 2 Cartons per order.